Fieldpiece SC53 - Dual Display Mini Clamp Meter Instrukcja Użytkownika Pobierz pdf (Strona 2)

SPECIFICATIONS

Display: 3¾ digit liquid crystal display (LCD) with a maxi-

mum reading of 3999.

Overrange: "OL" or “-OL” mark indication.

Auto power off: 10 minutes.

Operating environment: 32 to 122°F (0 to 50°C), at <70%

R.H.

Storage temperature: -4 to 140°F (-20 to 60°C), @ <80%

R.H. with batteries removed.

Accuracy: Specifications good in ambient conditions of

74°F ±8°F (23°C ±4°C), <75% relative humidity.

Temperature coefficient:0.1×(specified accuracy) per

°F/°C; 32 to 66°F (0 to 19°C); 82 to 122°F(28 to 50°C).

Altitude: 6561.7 feet (2000m).

Jaw opening capability: 30mm (diameter) conductor

Power: Three lithium-ion CR2032 3V batteries.

Battery life: 100 hours typical for lithium-ion on AAC (top

display), 75 hours typical for lithium-ion on dial functions

(bottom display).

Accessories: One pair vinyl test leads, ATB1 k-type ther-

mocouple (SC53), (3) 3V CR2032 batteries (installed),

ANC4 carrying case, and operating instructions.

Safety: IEC/EN 61010-1 (UL61010-1) CATIII

600V and IEC/EN 61010-2-032 (UL61010-2-032)

CATIII 300V, class II and pollution degree 2

indoor use comply with CE, C-tick certified.

DC Volts

Ranges: 4V, 40V, 400V, 600V

Resolution: 1mV

Accuracy: ±(0.5% rdg + 2 dgts)

Input impedance: 4V: 10MΩ

40V~600V: 9.1MΩ

AC Volts (50Hz - 500Hz)

Ranges: 4V, 40V, 400V, 600V

Resolution: 1mV

Accuracy: ±(1.2% rdg + 5 dgts),

±(1.5% rdg + 5 dgts) on 600V range

Input impedance:

4V: 10MΩ

40V~600V: 9.1MΩ

Minimum test time for stable reading: 2 seconds

Resistance

Ranges: 400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ

Resolution: 0.1Ω

Accuracy:

±(1.0% rdg + 4 dgts) on 400Ω to 400kΩ ranges

±(1.5% rdg + 4 dgts) on 4MΩ range

±(3.0% rdg + 5 dgts) on 40MΩ range

Open circuit volts: -0.45VDC typical, (-1.2VDC on

400Ω range)

Minimum test time for stable reading: 2 seconds

AC Current (50Hz - 60Hz)

Ranges: 40A, 400A

Resolution: 0.01A

Accuracy: ±(2.0% rdg + 6 dgts)

DC Current (SC52)

Ranges: 400μA, 4000μA

Resolution: 0.1μA

Accuracy: ±(1.0% rdg + 2 dgts)

Voltage burden: 1V (8V on 4000μA range)

Capacitance (SC53)

Range: 4μF, 4 0μF, 400μF, 4mF

4.000mF = 4000μF

Resolution: 1.0nF

Accuracy: ±(3% rdg + 10 dgts) on 4μF

±(3% rdg + 5 dgts) on 40μF to 400μF

±(5% rdg + 20 dgts) on 4mF (4000μF)

Minimum input range: >100nF

Safety: “dsc” symbol on LCD indicates that the

capacitor must be discharged before testing.

Continuity

Range: 400Ω

Resolution: 1Ω

Audible indication: Less than 25Ω

Response time: 500ms

Diode Test (SC52)

Test current: 1.2mA (approximate)

Accuracy: ±(3.0% rdg + 3 dgts)

Resolution: 10mV

Audible indication: Less than 0.25V

Open circuit volts: 3.0VDC typical

Temperature (SC53)

Range: -30 to 400°F (-34 to 204°C)

Resolution: 0.1°

Accuracy: ±1°F (32 to 120°F); ±0.5°C (0 to 49°C),

±1% + 1.5°F (-4 to 400°F);

±1% + 1°C (-20 to 204°C),

±2% + 4°F (-30 to -4°F);

±2% + 2°C (-34 to -20°C).

Sensor type: K-type thermocouple

Voltage

Amps AC Through Clamp

Resistance

Capacitance

Microamps (for flame diode)

CAT.III

CLAMP

400A

300V

NCV

HOLD

Disconnect test

leads and slide

TEMP switch to the

right plugging in

thermocouple.

Insure the

temperature being

measured is stable.

Maintain good

contact between the

thermocouple and

what's being

measured.

AT.

III

LAMP

400A

00V

NCV

HOLD

Temperature

Overload Protection (no fuses to replace)

VAC/DC 600VDC or AC RMS

AAC 400 AAC

Resistance 500VDC or AC RMS

Continuity 500VDC or AC RMS

Diode (SC52) 500VDC or AC RMS

Capacitance (SC53) 500VDC or AC RMS

μADC (SC52) 500VDC or AC RMS

Temperature (SC53) 60VDC or 30VAC RMS

LISTED

v09

1 2

CAT.III 1

Komentarze do niniejszej Instrukcji

Brak uwag

Fieldpiece SC53 - Dual Display Mini Clamp Meter Instrukcja Użytkownika Strona 2

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Urządzenia pomiarowe Fieldpiece SC53 - Dual Display Mini Clamp Meter